Announcement

Collapse
No announcement yet.

Radius Rod Washers & Bushes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    cupped strengthening plate coming soon!

    Compression Strut Bushes.jpg
    The answer isn't 42, it's 1/137

    Comment


      #17
      Hmmm, good question, not sure about that.

      Comment


        #18
        Just need to know if there's a strengthening plate on the nut side too.
        Compression Strut Bushes.jpg
        The answer isn't 42, it's 1/137

        Comment


          #19
          Ok Drew thanks , good job bye the way
          "The UK,s 2nd Most Easterly Stag" Quad Exhaust- ZF 4 Speed BOX

          Comment


            #20
            Originally posted by MandM View Post
            The above picture clearly shows the cup washer which is welded to the chassis leg. It is worthwhile checking these as that area is a bit of a rust trap. When I stripped my car the nearside one was completely rotted away. They can be bought from Robsports. See pic below

            s-l225.jpg
            John
            1978 Stag Brooklands Green

            Comment


              #21
              Originally posted by JOHNS View Post

              The above picture clearly shows the cup washer which is welded to the chassis leg. It is worthwhile checking these as that area is a bit of a rust trap. When I stripped my car the nearside one was completely rotted away. They can be bought from Robsports. See pic below
              During the checking did you by any chance have a look on the rear side of the chassis hole to see if there is also a doubler of some sort there?

              The answer isn't 42, it's 1/137

              Comment


                #22
                Originally posted by NeilR View Post
                Agree with DJT. Also agree with Robsport offering for the washers.
                Fitting them the wrong way round (Rubber bushes) allows the radius rod to wear the chassis hole oval - seen that a few times.
                Ive seen the radius arms with a wear groove in them but not seen the chassis hole oval

                Ive only had to repair the chassis hole, wear the radius arm ripped out of the chassis on one car,but that was mostly due to rust

                Dave
                73 mk 1/2 now gone to the dark side BLUE

                Comment


                  #23
                  Originally posted by dasadrew View Post

                  During the checking did you by any chance have a look on the rear side of the chassis hole to see if there is also a doubler of some sort there?
                  There wasn't
                  John
                  1978 Stag Brooklands Green

                  Comment


                    #24
                    OK, think we might have got this one licked now with all of the comments! Dunno about you, but I reckon this is the first time I've seen all of the components shown in their correct orientation - yeah SOC!

                    Compression Strut Bushes.jpg

                    Compression Strut Bush Suppliers.jpg
                    The answer isn't 42, it's 1/137

                    Comment


                      #25
                      Should Robsports not have these repair cups in stock you can contact Lloyd Reed who manufactures them. lloyd.reed02@gmail.com
                      John
                      1978 Stag Brooklands Green

                      Comment


                        #26
                        Post 24 looks spot on to me with the Robsport washers.

                        Just wish the chassis repair cup had been available when I needed one - had to fabricate one.

                        Comment


                          #27
                          Thanks for all your effort Drew, don't think you would this sort of thing on FB recorded for all, thanks again
                          "The UK,s 2nd Most Easterly Stag" Quad Exhaust- ZF 4 Speed BOX

                          Comment


                            #28
                            Proof of the pudding is in the eating. I ordered the Robsport washers and they arrived yesterday. Unfortunately - for the purists - their 134556 washer is no longer dished - it's more lke the Rimmers offering. On their eBay website it is still shown as truly dished like in the above pic in post 24, on their Shop website it isn't, and that's the one that arrived. The 134557 is good, with the smaller hole.

                            Drew
                            The answer isn't 42, it's 1/137

                            Comment


                              #29
                              Originally posted by MandM View Post
                              Thanks for all your effort Drew, don't think you would this sort of thing on FB recorded for all, thanks again
                              +1 I think drew should issue a re-written ROM
                              There are 2 secrets to staying on top :- 1. Don't give everything away.
                              2.

                              Comment


                                #30
                                Originally posted by jbuckl View Post

                                +1 I think drew should issue a re-written ROM
                                Already in work see 51.45.29 4. & 5.


                                Stag ROM 1977 - 51 - REAR AXLE - 12 mod.jpg
                                The answer isn't 42, it's 1/137

                                Comment

                                canli bahis siteleri bahis siteleri ecebet.net
                                pinbahis pinbahis dizitune.com
                                ankara escort
                                Working...
                                X