Announcement

Collapse
No announcement yet.

Fitting new Solenoid to overdrive, assistance please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chix
    replied
    Thanks team, I thought the Solenoid 'pushed' rather than 'pulled' so that was exactly the response I was after!

    New solenoid fitted and overdrive works a treat!

    On to the next issue... :-D

    Leave a comment:


  • trunt
    replied
    Could it be that the arm has been aligned with the hole in the off position? Then engaging pulls the arm past the hole? Maybe someone with an A type can tell?

    It’s been a long time since I had an Atype so I may be way off there...
    Due to wear in the linkage, the hole reference on mine was useless, I had to set it up by measuring the lift on the ball valve.. see technical section... I posted that info there...

    Terry
    Last edited by trunt; 27 May 2021, 19:42.

    Leave a comment:


  • NeilR
    replied
    On an A type overdrive, the solenoid pulls it out when energised. So what your seeing is correct.
    Last edited by NeilR; 27 May 2021, 15:21.

    Leave a comment:


  • Chix
    started a topic Fitting new Solenoid to overdrive, assistance please!

    Fitting new Solenoid to overdrive, assistance please!

    Hi team!

    Should the plunger naturally be forced out by a spring or something while the engine is off, so the overdrive is disengaged?
    Or does the pressure of the grearbox force it out when engine running?

    I understand how the solenoid pushes it in, I just want to know how it is pushed out, to make sure mine isn't broken!

    See my video:



    Thanks!!

canli bahis siteleri bahis siteleri ecebet.net
pinbahis pinbahis dizitune.com
ankara escort
Working...
X