Carburettor Fuel Vent Hose Routing

[Willy]

There was no carburettor fuel vent hosework on my Stag when bought. I now have the necessary parts from Rimmer Bros.
There is no obvious route for the hoses and clips. I’ve routed them with the T-piece between the offside rocker cover and air filter housing, with the drain exiting down between the alternator and the power steering pump, but unclipped.
Can anyone please advise on the correct routing for these hoses? There’s no mention of these in either the Haynes or the Repair Operation Manuals. Thanks in advance.

[DJT]

They join at the tee piece, then run under the air filter housing and down the front of the timing cover. A P-clip (PCR411) secures the pipe to the timing cover. On mine, the p-clip is fastened using one of the timing quadrant bolts.

[Klaus Schlueter]

Here it is Willy
IMG_5733.JPG