Announcement

Collapse
No announcement yet.

House to and from radiator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trunt
    replied
    I think my top hose is a bit too short,
    Strangely It fit the Mk1 radiator beautufully but not so happy with it on the Mk2 radiator.

    Leave a comment:


  • sujitroy
    replied
    Thx. It's normal then as I had to mess with the hoses on Stag no.1 I cut it slightly too short and it is leaking slightly. . May this weekend I'll mix and match to get them both right.

    Leave a comment:


  • wilf
    replied
    The bottom hose does need careful fettling to get it to stay clear of the alternator fan. And that means getting the hoses at each end of the metal transition piece into "just the right place and length".

    Top hose is nowhere near as critical - just cut to suit.

    Leave a comment:


  • Phil S
    replied
    from memory I took about 2" off one of the bottom hoses, this was to get it clear of the fan, thats now no longer there!

    Leave a comment:


  • sujitroy
    started a topic House to and from radiator

    House to and from radiator

    Do people trim hoses to and from the radiator? I'm noticing the ones I have bought seem that way. For instance, the top one to thermostat cover wont fit unless I cut. I'd expect it to have a nice 90 bend from the cover to clear the cylinder head, but it sure doesn't Mk1 with early manifold. Both bottom radiator hoses seem too long too for the metal pipe to be clamped to the timing cover. Bought from reputed supplier.
    Sujit
canli bahis siteleri bahis siteleri ecebet.net
antalya escort
canli mac izle
Working...
X