Voltage Stabilizer

[StagJonno]

£6 for soldering 3 short lengths of wire and a bit of heatshrink, not a bad little number.

Not sure how you expect the guy to feed his family - P&P was included, too.

[dave1959]

Moss Voltage Stab. P/no 131-555 is £18 in original style case

[KOY 23]

£6 for soldering 3 short lengths of wire and a bit of heatshrink, not a bad little number.

[thebadleys]

Here you go Martin,

https://www.ebay.co.uk/itm/Solid-sta...SkAAOSwoSleFLb 0

Nigel

[MandM]

thanks Guys will have another look

[DJT]

Easily fitted inside an original VS case:

http://www.britishv8.org/articles/mgb-voltage-stabilizer.htm

[KOY 23]

Centre pin is an earth as is the mounting tab, use one or the other. Left hand pin is input and right hand is output.

[022Dave]

I bought mine from RS Components. I've included a photo of its wrapping with the component part number. From memory, the central pin is not used.

https://uk.rs-online.com/web/p/low-dropout-voltage-regulators/5359010/?sra=pstk

Dave

IMG_0792.HEIC IMG_0793.HEIC

[DJT]

Type Voltage Stabiliser into ebay. Plenty on there.

[tvrgeek]

I get mine from Moss Motors. It is just a 10V regulator chip soldered in there.
Gauges will read HIGH as the typical old stabilizer quits. If reading low, I would be more suspect of bad connections.

[MandM]

Hi Guys, I have been searching the forum for info of where to obtain a solid state voltage stabilizer but have come up with a blank does anyone know if the LD or Rob sport one is solid state without me phoning them or will the ones they sell do?, fuel and temp gauge reading low sometimes.

Thanks for your help in advance

I've seen a site about make your own but didn't want that hassle

Martin