Part advice under rear seat

[BrookeBond]

In need to replace a reasonable amount of this section due to tin worm. The part is no longer available, but is anyone able to offer any suggestions of any alternative carp parts which may bear some resemblance to this profile please or have any spare donors ?
note, photo borrowed to show what I’m after,
thanks

[trunt]

I had real bad worm there and spent 2 years deciding what to do, it was beyond my capabilities to patch it. In the end I got a section from a accident damaged writeoff from Tony white and welded it in, looks really good and you would hardly be able to notice it..

pics are in my website about 3/4 way down the bodywork page

https://www.terryhunt.co.uk/stag/body.html

[paul jorgensen]

I recognise that body shell...

hopefully you you will find a donor part.

[BrookeBond]

I recognise that body shell...

hopefully you you will find a donor part.

I have been enjoying going through the various rebuild threads, yours most recently, thank you.
learning a lot,

[BrookeBond]

I had real bad worm there and spent 2 years deciding what to do, it was beyond my capabilities to patch it. In the end I got a section from a accident damaged writeoff from Tony white and welded it in, looks really good and you would hardly be able to notice it..

pics are in my website about 3/4 way down the bodywork page

https://www.terryhunt.co.uk/stag/body.html

that looks a really nice you have made there. May I ask what sort of cost that section was please?

[trunt]

A few years ago but I think it was around 250?

Terry

[Tonywhite]

I have another damaged shell that is being dismantled for panels and the seat pan is rust free and reusable

[Tonywhite]

Dirty but not rusty !!!! 17BF8E93-4704-4FC9-A26E-97835771D00D.jpg